The Desen DSP 1008 High Precision Fully Automatic Screen Printer operates a direct drive system which is composed of two independent print heads. Each of them is driven directly by a high precision stepping motor. The Desen DSP 1008 High Precision Fully Automatic Screen Printer has an automatic stencil cleaning system which can be programmed for a variety dry, wet and vacuum cycle to clean the underside of the stencil. The PCB transportation and clamping systems are also driven by stepping motors. The stepping motor on the Desen DSP 1008 High Precision Fully Automatic Screen Printer is smarter than an A/C motor as it separates the transport process in to two stages. Desen use a strong vacuum chamber to support the PCB and this allows the user to print thinner PCB’s. An advanced precise optics vision system with upper/lower vision improves PCB and stencil position. It uses an Omni direction lamp-house that ensures optics vision accuracy. Desen DSP 1008 High Precision Fully Automatic Screen Printer operation system is based on Windows XP interface. Both programming and operator interface are using graphic user interface (GUI) for simple operation. The Desen DSP 1008 offers the bst pound for pound performance in the stencil printing market and this is reflected by the extraordinary amount of printers sold world wide. Please contact us to discuss all the purchase / rental schemes we have available, a new Desen DSP 1008 high precision fully automatic screen printer could be far more affordable than you think.
Features
Direct type print heads driven by elevator motor
Precise PCB transport system
Automatic stencil cleaning system
Safe distribution of electric control
Fully automatic set-up
User friendly operation interface
CE Marked
Technical Parameters
Print Accuracy – Accuracy ±0.025mm
Repeating Accuracy – ±0.01mm
Cycle Time – ＜8S
Stencil Size – 470*380-737*737mm
Stencil Clamping – Air Valve
Stencil Positioning – Automatic
Platform Calibration Limit – X:±4mm Y:±6mm
Platform Direction Limit – ±2º
PCB Printing Size – 50*50-400*340mm
PCB Thickness – 0.4-5mm
Transport – L-R, R-L, L-L, R-R
Transport Speed – Stepping Motor，100-1500mm/s Programmable
PCB Weight 0-3kg
Transport Hight – 900±40mm
Transport Width – 50-340mm
SMEMA Interface – Standard
PCB Separation – 3 Stages Programmable Separation
Paste Inspection – 2D Inspection (Optional)
Power Input – AC:220±10％,50/60HZ-1￠
Power Consumption – 3KW
Air Pressure – 4.5~6Kg/cm2
Machine Size – 1140*1360*1560mm
