Machine Introduction:
CMC-800 is a camera module professional cleaning machine for the camera products, such as wafer, CMOS, Holder and other surface dust cleaning.
Machine Features:
1.the camera class module surface dust, impurities for cleaning machines;
2.mirror stainless steel integration closed body, no pollution of the working environment, suitable for use of clean room requirements;
3.can replace the cleaning plate cleaning a variety of products, cleaning discs by product custom;
4.PLC automatic control, easy to operate;
5.transparent explosion-proof front door, safe operation, easy to observe;
6.the whole system instrument display, at any time to monitor the cleaning situation;
7.the use of two fluid cleaning, cleaning high precision, zero damage to the product, pure water consumption is minimal;
8.rotating spray bar, to avoid secondary pollution products;
9.equipped with static elimination device, cavity wall heating device, auxiliary cleaning to achieve the best results;
10.equipped with 2 air filtration system, compressed air in line with ISO8573, 1 standard;
11.body compact, small footprint;
12.full use of ultra-pure water cleaning, RoHS-compliant.
Machine Specifications:
|
Equipment dimensions
|
880mm（L）×960mm（W）×1880mm（H）
|
|
Cleaning plate specifications
|
Custom (cleaning disc diameter <ø550mm)
|
|
Cleaning method
|
Two fluid cleansing
|
|
Dry way
|
High-speed centrifugal drying
|
|
power supply
|
AC380V 50HZ
|
|
Total power
|
7KW
|
|
power consumption
|
When cleaning: 3.5kw / h
|
Standby: 1kw / h
|
|
Drive horsepower
|
3HP
|
|
Environmental filtering
|
0.3μm；99.999%
|
|
Air filter
|
1μm×1；0.01μm×1
|
|
Centrifugal speed
|
100-1500RPM
|
|
Pure water consumption
|
0-7L/Min
|
|
Gas consumption
|
10-30m³/H
|
|
Cleaning pressure
|
Liquid pressure: 3-8Kgf / cm² Air pressure: 0.2-0.5Mpa
|
|
DI water supply
|
Flow:> 7LPM Resistivity:> 17MΩ
|
|
Air supply
|
Pressure: 0.45-0.7Mpa; flow:> 30m ³ / H (cleanliness meet the cleaning requirements)
|
|
Pure water inlet diameter
|
Ø12mm hose or PT1 / 2 "internal thread
|
|
Air inlet diameter
|
Ø12mm trachea
|
|
Drain outlet diameter
|
PT 1 "internal thread
|
|
Outlet diameter
|
4 "× 2 (need to strengthen the ventilation, wind speed greater than 3m / sec)
|
|
Net weight of machine
|
450KG
|
