Tamura GNV51-7610PM(L) Nitrogen Reflow Oven Machine Specifications:
|
Dimensions |
W1550×L7600×H1550 |
|
power supply |
Three-phase four-wire AC380V |
|
compressed air |
none |
|
Heating zone length |
4.42m |
|
length of cooling zone |
1.48m (including 0.3m cooling recovery) |
|
power consumption |
Starting power 76KVA, stable power 20KVA (no load) |
|
nitrogen consumption |
Above 400NL/min, above 99.99%, above 0.4-0.7MPa |
|
Orbit parallelism |
±1mm |
|
Anti-vibration design of track |
Excellent (the whole is divided into 4 sections, and there are guide plates at the entrance and exit to facilitate the smooth entry of the substrate into the furnace and smooth discharge) |
|
track design |
Manual width adjustment device (OP: automatic width adjustment can be upgraded) |
|
heat transfer capacity |
Excellent (high heating capacity, strong thermal cycle capacity) |
|
speed range |
0.5-2.0m/min |
|
Temperature regulation accuracy |
± 1℃ |
|
electrical control |
Centralized control, CD-ROM, automatic switching, timer, alarm |
|
Optional accessories |
Catalyst, uninterruptible power supply (UPS), O2 concentration meter, anti-bending device, automatic track width adjustment, automatic lubricant addition, water cooler (external) |
Request for quotation and Quotes Average quote returned in under 1 work day.
